build suggestions

[LosTiNoHIo]

i have a 90 tsi 5speed awd, as it sits here is list of things it has.
BR FMIC
Dejon pipes, with tial bov, 3" gm maf
BR 3" turbo back
ACT 2600
light weight FW(i forget what brand)
brand new head with BR springs, stock cams, stock gears, kevlar timing belt
the bottom end needs rebuilt or replaced
maft GenII
eprom ecu
92 wire harness
255 in tank
Stock intake mani, TB, rails
550 injectors
FPR, MBC

my goal is a street car with 300-350 hp that i can drive to school and work

i am going to upgrade to maft pro
I have a FP3565 that i think is too much turbo for my goal.

what i could use input on is as follows.

should i upgrade cams, gears
what should i do about the block, 2.0 or 2.3, stock or built
what would be a good turbo? is evoIII 16g too small
should i get a new intake mani, TB

it has been way too long since i have had one running, i need to figure out a plan and bring this thing back from the dead

thanks for input

[David Buschur]

The EVO3 turbo will be fine. A stroker is awesome on the street. The rest of the combination looks good enough to hit the power goal you are asking about. Good luck!

[LosTiNoHIo]

i have been leaning towards the 2.3 for a while now, i think you just convinced me.
will the 3" turbo back be too much for a turbo with an internal wastegate?

[tallcodya]

get rid of the maft and 3in gm maf go dsmlink and speed density or atleast link and the maf. that way with link you can have your car tuned for everything.