We were able to get our hands on a few Evo JDM intake manifolds. The main reason we wanted these was for the simple fact of how much cleaner they look under the hood compared to the US version. There really is no power advantage/disadvantage to swapping.

We only have 4 of these available at this time. Once they are gone we may or may not have anymore. It all depends if we can get our hands on some more.

The JDM manifold does NOT have an EGR port nor does it have a MAP sensor port. Unless you're running speed density setup or running an aftermarket MAP sensor you will not be able to use this. Either way you will need to drill and There is room on the intake manifold where you can drill and tap for certain fittings as you can see David did on the BAD BISH in the second picture.

The manifold will arrive to you after its been hand ported, then hot tanked to get any grime off of the outside & to be sure the inside free of any shavings or dust. It will look about as good as new when it arrives to your door.

Side by Side




Powder Coated and Installed:




*NO CORE IS REQUIRED*


PRICE: $425 SHIPPED


Powder coating option add $75 (many colors available. Wrinkle Black is shown)



The quickest way to get your hands on one of these would be to call the shop directly at 440-839-1900. We take all major credit cards or you're welcome to use Paypal to make payment. The Paypal address is davidbuschur@buschurracing.com

If you have any questions or concerns please feel free to ask either here or shoot me a pm.

Take care!