BuschurFacebook    Your AD Here    Buschur BADBISH 250x90 Test
Page 1 of 2 12 LastLast
Results 1 to 20 of 23

Thread: Just You Average 500rwhp Cobra

  1. #1
    Join Date
    Apr 2010
    Location
    Oklahoma
    Posts
    317

    Default Just You Average 500rwhp Cobra

    I now own that Cobra but also retained my Evo..For 15K I got a 2003 Ford Mustang Cobra "Terminator"

    I will be paying 10K over the next 2 and a half years and my step dad pated 5K cash for me

    It has the following mods
    -2.8 Pulley(I think that is like 10Psi
    -4lb Lower Pulley(So 14 all together)
    -Afco Heat Exchanger
    -SCT Tuner(Going to get a MegaSquirt ECU)
    -3.73 Gears
    -Kooks LT Headers
    -Kooks O/R X Pipe
    -Borla Catback Exhaust
    -Spec 2+ Clutch(Hate it, Getting a Steeda Tri-Ax, and McLeod Twin Disc)
    -Eibach Lowering Kit
    -Subframe Connectors
    -Black FR500's(315/35/18 DR's in Back, Nitto 275/35R318's in Front)

    Here are my Future Plans(All After the Evo hits 500awhp)
    -Screw IRS!I want a live Axle!
    -Built 9" Rear ^ Goes with that
    -Comp Custom Blower Grind Cams Stage II
    -MMR 1500S Long Block(5.1L Engine Can hold 1500hp)
    -^Stage 5 Ported and Polished Heads
    -2200Hp Fuel System(3 Ford GT Super Car Pumps)
    -AeroForce Interceptor Gauges
    -MSD Ignition
    -NX 2 Step Plate Kit
    -Reichard Racing 2.65 Pulley
    -Stage 6 Ported Eaton Blower
    -Hellion TT Kit 67mm Turbos
    -Maximum Motorsports Stage 5 Kit(Suspension)(Comes with like eveything)
    -McLeod Twin Disk Clutch
    -Built Tranny
    -MegaSquirt ECU

    Shooting for 1000rwhp

    Maybe More

    Pics!!


    I know have a Vert!

    Chip Foose Signing the dash!


    The Beast that Powers It!(Imagine 2 67mm Turbo sitting in there



    Throwing this in there for fun!(Imagine This under my hood!)

    03 Tarmac Black Evo Under the Knife.Carrillo H Beams, JE Pistons, 2.4 Crank, PTE 6262, Shearer Mani, Shep Stage Trans/X Case, A lot of Coated Goodies, D2's and Hoosiers...9's or Bust!
    03 RedFire CobraKB 2.4(15psi), Full Bolt Ons, And in about a year twin 66mm Turbos!

  2. #2
    Join Date
    Apr 2010
    Location
    Oklahoma
    Posts
    317

    Default

    The Car has Texas plated because I bought it last night and haven't changed anything!
    03 Tarmac Black Evo Under the Knife.Carrillo H Beams, JE Pistons, 2.4 Crank, PTE 6262, Shearer Mani, Shep Stage Trans/X Case, A lot of Coated Goodies, D2's and Hoosiers...9's or Bust!
    03 RedFire CobraKB 2.4(15psi), Full Bolt Ons, And in about a year twin 66mm Turbos!

  3. #3
    Join Date
    Jun 2008
    Location
    living under the buschur dyno
    Posts
    2,932

    Default

    damn it must be nice to have two monsters haha nice buy tho i love that bodystyle just not a conv fan
    DB quote "....this isn't some chinese piece of shit...."

  4. #4
    Join Date
    Apr 2010
    Location
    Oklahoma
    Posts
    317

    Default

    ^ Yeah I hear ya..2 problems with the car
    1.It has 99.3K on it!
    2.Its a Vert which is nice but eh..Makes it weigh 500lbs more!!

    I wonder if it has more hp than Davids Stang?
    03 Tarmac Black Evo Under the Knife.Carrillo H Beams, JE Pistons, 2.4 Crank, PTE 6262, Shearer Mani, Shep Stage Trans/X Case, A lot of Coated Goodies, D2's and Hoosiers...9's or Bust!
    03 RedFire CobraKB 2.4(15psi), Full Bolt Ons, And in about a year twin 66mm Turbos!

  5. #5
    Join Date
    Jun 2008
    Location
    living under the buschur dyno
    Posts
    2,932

    Default

    i see davids stang putting a hurting on yours, hes lighten his a fair amount...im not sure of the power tho
    DB quote "....this isn't some chinese piece of shit...."

  6. #6
    Join Date
    Apr 2010
    Location
    Oklahoma
    Posts
    317

    Default

    Probably there will be no chance in about a month..8lb lower and a 2..60 upper!And a stage 6 Ported Eaton so around 20 to 21psi form what the guys on SVTP tell me..So about 550hp!

    I wonder if David will tune it ..Lol.
    03 Tarmac Black Evo Under the Knife.Carrillo H Beams, JE Pistons, 2.4 Crank, PTE 6262, Shearer Mani, Shep Stage Trans/X Case, A lot of Coated Goodies, D2's and Hoosiers...9's or Bust!
    03 RedFire CobraKB 2.4(15psi), Full Bolt Ons, And in about a year twin 66mm Turbos!

  7. #7
    Join Date
    Jul 2005
    Location
    Dayton,Ohio
    Posts
    1,436

    Default

    Very nice looking terminator Doesn't look like it has any miles on it at all.
    Squarepants Racing
    Buschur Racing
    '03 lightening yellow evo
    348 whp and 305 trq on BR dyno 12.5@110 mph
    '03 Tarmac Black evo8 (sold) : (
    1.7 60ft 10.86@133 mph on pump/meth
    Buschur ReTuned built 2.3, 40R 571 awhp, 444 awtrq pump/meth. 617 whp, 486 trq C16 map

    '91 red 1G Talon on the way!

  8. #8
    Join Date
    Apr 2010
    Location
    Oklahoma
    Posts
    317

    Default

    Looks like..I'm installing cams soon and when I do that I'm going to go ahead and rip the whole thing apart to check on things 100K is not very few lol.
    03 Tarmac Black Evo Under the Knife.Carrillo H Beams, JE Pistons, 2.4 Crank, PTE 6262, Shearer Mani, Shep Stage Trans/X Case, A lot of Coated Goodies, D2's and Hoosiers...9's or Bust!
    03 RedFire CobraKB 2.4(15psi), Full Bolt Ons, And in about a year twin 66mm Turbos!

  9. #9
    Join Date
    Jun 2008
    Location
    living under the buschur dyno
    Posts
    2,932

    Default

    at almost 100k we'll see how long it holds together ...although i have some cars take a serious beating for a long time and remain bulletproof
    Last edited by mullen; 06-27-2010 at 07:37 AM.
    DB quote "....this isn't some chinese piece of shit...."

  10. #10
    Join Date
    Mar 2006
    Location
    Las Vegas
    Posts
    1,787

    Default

    500hp and goes 12's lol. All kidding aside I like the cobra's! Just keep SCT.
    I USE AND ONLY SUPPORT THE BEST. IF BUSCHUR MAKES IT, I HAVE IT
    Buschur Built and Tuned... 9sec full weight street car.
    10.35 at 144.97 on only 32psi and ban from LVMS no highboost pass for me EVER
    http://www.buschurracing.com/
    http://www.awdmotorsports.com/
    http://www.shearerfabrications.com
    http://www.cbrdspeedfactory.com/
    www.myspace.com/vwjeff

  11. #11
    Join Date
    May 2003
    Location
    Wakeman, Ohio
    Posts
    5,443

    Default

    On our dyno my car makes about 425 whp. On a Dynojet it should put down close to 550 whp. I'm just running a stock 4.6 3v engine, they are only good for about 550 hp at the flywheel so I am pushing my luck. Mine has run 12.003 at 120.66 on radials.

  12. #12
    Join Date
    Jun 2008
    Location
    living under the buschur dyno
    Posts
    2,932

    Default

    Convt. 3780 lbs
    shelby gt 3,508 lbs, not sure what davids weighs now after the mods he made
    DB quote "....this isn't some chinese piece of shit...."

  13. #13
    Join Date
    Apr 2010
    Location
    Oklahoma
    Posts
    317

    Default

    David your isn't SC?
    vwjeff-Yeah I'm keeping it ..guys over on SVTP said a MegaSquirt wasn't worth it .\
    Mullen-I think it will hold but I'm just doing it to make sure.It will get a set of Manley I Beams and CP Pistons at about 120K then eh a few turbos just basic stuff.
    03 Tarmac Black Evo Under the Knife.Carrillo H Beams, JE Pistons, 2.4 Crank, PTE 6262, Shearer Mani, Shep Stage Trans/X Case, A lot of Coated Goodies, D2's and Hoosiers...9's or Bust!
    03 RedFire CobraKB 2.4(15psi), Full Bolt Ons, And in about a year twin 66mm Turbos!

  14. #14
    Join Date
    Jul 2003
    Location
    Norwalk,Ohio
    Posts
    2,454

    Default

    Thats pretty much the car I wanted for a long time. Burgundy '03 Cobra w/ rear seat cover & roll bar. I wanted Cobra R wheels on it though. I would have owned one but I could never find one in the price range I was working with though.

    Have fun with it.
    Jarrod Barnett
    Sales Manager

    www.BUSCHURRACING.com

    Buschur Racing
    24 West Main St.
    Wakeman, OH 44889
    Phone:440.839.1900
    Email: jarrod@buschurracing.com

  15. #15
    Join Date
    Dec 2009
    Location
    SF Bay Area, CA
    Posts
    54

    Default

    Nice Cobra ya got there i LOVE the REDFIRE color i always thought it was the best for that car.

    I had 2 03 Cobras one REDFIRE w/ flat black 18" CCW's and one was BLACK on stock chrome wheels.

    The REDFIRE was slower w/ a 2.76 upper only and ported eaton on pump gas that ran low 11's @ 120+

    The BLACK was the quickest/fastest w/ a 2.6L KB on top w/ 100oct it ran 10.7 @ 137 as a full weight street car driven on 275 MT DR's

    REDFIRE = Diablosport

    BLACK = SCT

    Somedays i really miss those cars compared to the Evo but they are all fun in their own ways........funny how my Evo is way quicker and faster than both but not nearly as fun to put around daily in

  16. #16
    Join Date
    Mar 2006
    Location
    Las Vegas
    Posts
    1,787

    Default

    Yeah man SCT is the shit, I have seen big power on it! It's amazing what it will do.
    I USE AND ONLY SUPPORT THE BEST. IF BUSCHUR MAKES IT, I HAVE IT
    Buschur Built and Tuned... 9sec full weight street car.
    10.35 at 144.97 on only 32psi and ban from LVMS no highboost pass for me EVER
    http://www.buschurracing.com/
    http://www.awdmotorsports.com/
    http://www.shearerfabrications.com
    http://www.cbrdspeedfactory.com/
    www.myspace.com/vwjeff

  17. #17
    Join Date
    Dec 2009
    Location
    SF Bay Area, CA
    Posts
    54

    Default

    By the way have you gone to the 26 spline input shaft already?

    Maybe a good idea when you go to the twin disk i really wish i had a twin in either of my Cobras as the cable actuated fork SUX!

    A twin w/ a hydraulic tob would be PERFECT.

    And don't knock the IRS too much i ran consistantly in the 1.5x range on the DR's

  18. #18
    Join Date
    Apr 2010
    Location
    Oklahoma
    Posts
    317

    Default

    Okay here are my "Within 2 Months Plan"
    -Posi Ported Blower
    -2.6 Pulley
    -4# Lower
    -McLeod Twin Disk
    -26 Input
    -IRS Grip Pack(EXPENSIVE!)
    -4.10's
    -Cams
    -Maybe a 100 Shot
    -Bogarts
    -MT DR's.

    Then 10's?
    03 Tarmac Black Evo Under the Knife.Carrillo H Beams, JE Pistons, 2.4 Crank, PTE 6262, Shearer Mani, Shep Stage Trans/X Case, A lot of Coated Goodies, D2's and Hoosiers...9's or Bust!
    03 RedFire CobraKB 2.4(15psi), Full Bolt Ons, And in about a year twin 66mm Turbos!

  19. #19
    Join Date
    May 2003
    Location
    Wakeman, Ohio
    Posts
    5,443

    Default

    Yes, my car is supercharged now but was not when I bought it new.

  20. #20
    Join Date
    Dec 2009
    Location
    SF Bay Area, CA
    Posts
    54

    Default

    Quote Originally Posted by SpeedySam View Post
    Okay here are my "Within 2 Months Plan"
    -Posi Ported Blower
    -2.6 Pulley
    -4# Lower
    -McLeod Twin Disk
    -26 Input
    -IRS Grip Pack(EXPENSIVE!)
    -4.10's
    -Cams
    -Maybe a 100 Shot
    -Bogarts
    -MT DR's.

    Then 10's?
    10's are achievable w/o some of the mods listed

    I was never a fan of spraying the Eaton but i know lots of people have success w/ it but similar to the Evo i prefer boost only

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •