Exedy Twin HD to Triple Upgrade?

[1FINE9]

how much did the upgrade cost you ccrain i am very interested in doing this too because i love they way the exedy twin feels i do not even want to think about getting a new clutch brand if i dont have to my mods are almost the same as the op thanks.

[johnny v]

where can one go to get the triple plate upgrade since i have the twin disk and am going to build my car in the near future?

[redevo_dj]

where can one go to get the triple plate upgrade since i have the twin disk and am going to build my car in the near future?

Buschur installed mine when I did my build but I got my rebuild kit from Mike @ awd.

[redevo_dj]

Also to the Op if you haven't found the parts you needed I believe its but I'm sure either Nick, or Jrod might be able to get the part #'s for you.

You might want to to double check the part #'s but this is what I had. 3 disks and two intermediate plates.

2 x IMO2
3x DM11R

[boostaddict]

alll vendors will say to upgrade if your near a clutchs limits. but ,did anyone ever fry a exedy twin yet? if so,at what power levels?
i would like to see some real life data . if your clutch is still good then go enjoy your beaitiful car in action and lets see it run 130`s . why waste money replacing good parts especially when its a twin plate for gods sake

[92laser]

--------------------Enquiring Minds Want to Know-------------------------


TRIPLE TRIPLE TRIPLE the fun. I need this also however very scared to find out costs.

[Rogue]

After checking the math. Its about 850 in parts. If your twin is decent and not that old -- I have seen them sell for 700-1000.

Id put that 1000 towards a brand new triple and call it a day.

[mrboost05]

After checking the math. Its about 850 in parts. If your twin is decent and not that old -- I have seen them sell for 700-1000.

Id put that 1000 towards a brand new triple and call it a day.

thats without a new pressure plate right ?

[Rogue]

thats without a new pressure plate right ?

850 is JUST the 2 floaters and 3 disks. And that also assumes you can use the flywheel and pressure plate from your exedy twin

[92laser]

Good gooooogley moooogley. I have started to hear good things about this OS giken and a freind just put 1 in his nine and feels pretty good. Maybe its time to start saving and go that way. I think the twin should hold more, Great clutch but I think for the money should hold more than it does. Just my 2 cents.

[K-turbo]

Isn't the "Bastard" running the twin HD right now? If so it's holding the black at 600wtq!

[Rogue]

Isn't the "Bastard" running the twin HD right now? If so it's holding the black at 600wtq!

Good question. And its on a DJ dont forget.