Buschur Racing Shortblocks.. New Lineup!!! 2.1L Race Engine Now Available!!!

[Mike@AwdMotorsports]

Alright guys.. We are proud to annouce the release of the new Buschur Racing 2.1L race Motor to the already stout arsenal.. We have been testing this motor and have great results.. Currently, the Buschur Racing Badbish is running this motor.. At the 09' Shootout the car ran 9.1 @ 150+ on multiple passes without an issue.. Some of the benefits of the the 2.1L are..

Better Rod Stroke Ratio for safer High Rpm use..

Lesser Expensive 4g64 Core.. No core required.. We have cores on Hand ALWAYS..

Ability to run a wet block for big boost applications..


We are offering the Buschur 2.1L motor currently with the following setup..

Buschur Spec Je Pistons @ 9.5 or 10:1 Compression..

Manley Turbo Tuff Rods or GRP Aluminum Rods..

ARP Rod Bolts , Bearings, Fully Blueprinted and Balanced.

Block pricing for the 2.1L is 4000.00 + Shipping.. NO BLOCK CORE REQUIRED ( if you have 4g63 cores Discounts will be given ).. These motors will be on the shelf ready to ship.. No block core required.. if you have a good 4g63 crank we will need that for the build.. If You do not provide a 4g63 Crank a core charge will be applied..


Buschur Racing 2.0L & 2.3L Pricing and Options!!!



Option #1
BR Spec J&E Tough Skirt Coated Forged Pistons, Crower Rods, ARP Rod Bolts, Bearings, Fully Blueprinted and Balanced. 3100.00 + Core + Shipping


Option#2
BR Spec J&E Tough Skirt Coated Forged Pistons, GRP Aluminum Rods, Bearings, O-ringed, Fully Blueprinted and Balanced. 3250.00 + Core + Shipping

^^^ THIS IS WHAT WE USE IN OUR PERSONAL CAR AND RUN 8's With!!!! ^^^

Option#3
The Buschur 2.3L Motor kit includes Stroker Crank, BR Spec J&E Tough Skirt Coated Forged Pistons, Crower Rods, ARP Rod Bolts, Bearings, Fully Blueprinted and Balanced. Priced at 3600.00+ Shipping with your good core. This is an EXCELLENT option for a street car!!!





Buschur Stage 3 Head 1750.00 Shipped + Core

We are now offering our EVO 8 & 9 Stage 3 Cylinder Head.

This assembly includes:
- Custom BR Bronze valve guides
- Custom BR dual stainless steel valve springs
- BR titanium retainers
- BR stainless intake valves
- BR stainless exhaust valves
- Stainless Oring around each combustion chamber
- Complete port & polish job

[Evoluvin]

Damn mike GREAT prices... maybe this time next year ill be looking into one of those!!!! Also Mike, would a 4g63 head fit on the 2.1? ( might be a dumb question ) Also Why aren't you running the 2.1 in your 8 second car?

[Mike@AwdMotorsports]

The 4g63 head is what is used on the 2.1L.. We havent used the 2.1L just yet in our race car as our Spare 2.0L is still running.. When it gets tired we will probably make the switch for sure..

Mike

[GQ 05YellowEVO8]

Dang, I want this 2.1L block so bad....