SD Jitter fix.
There are now 3 beta jitter fixes for the SD patches. I have the xmls for 2 of them. the second two of them.
Has been tested but not by me. 9653
<table name="Scaling Factor for Transition Load" category="Speed Density Programming" address="1230" type="1D" level="1" scaling="uint16"/>
<table name="BT -> NOP for Static DeltaMasterLoadPos/Neg Threshold" category="Speed Density Programming" address="27a0a" type="1D" level="1" scaling="Hex16"/>
for the first listed change 112 to 0.
for the second change 8909 to 9. You must enter it as 0x0009 since its a hex.
8859
<table name="Scaling Factor for Transition Load" category="Speed Density Programming" address="1230" type="1D" level="1" scaling="uint16"/>
<table name="BT -> NOP for Static DeltaMasterLoadPos/Neg Threshold" category="Speed Density Programming" address="2a972" type="1D" level="1" scaling="Hex16"/>
for the first listed change 112 to 0.
for the second change 8909 to 9. You must enter it as 0x0009 since its a hex.
Im posting this since MR Fred hasnt seemed to make the transition yet.
I posted it here so HE gets the credit he deserves. Im about to go try the later fix a shot now.
Hopes this helps
ALSO do just one fix not both as recommended by MR Fred
Last edited by grntsiturbo; 12-03-2009 at 05:09 PM.
Adam Rutherford
93 awd TSi 11.69 @121 lowboost(26 psi),445whp,358tq AWD Dynojet still in the garage.
04 Evo BR built & Tuned 480 whp pump on their Dyno, 544 DynoJet STD Correction. 82HTA .63 hotside on the stock MAF
Currently SD converted 96530706 531whp 408 wtq 33psi straight Shell 93 pump CBRDs MD self retuned and set up. 1K PTEs BR double pumper