SportCompact    BuschurFacebook    Shootout
Page 1 of 2 12 LastLast
Results 1 to 20 of 26

Thread: Our first offering in a stock appearing turbo upgrade for the Coupe!

  1. #1
    Join Date
    Jul 2003
    Location
    Norwalk,Ohio
    Posts
    2,454

    Default Our first offering in a stock appearing turbo upgrade for the Coupe!

    Yesterday I posted this in our BOV solution thread.

    Quote Originally Posted by Jrod@Buschur View Post
    Notice anything different about this stock Coupe turbo other than the BOV? More information to come on that.

    It seems that it grabbed many people's interest. The replies and PM's started pouring in.

    Well....without further ado here is the information that many people are patiently waiting on.

    March 27th I picked up the Coupe at the dealership. March 30th it arrived to the shop and we began R&D. On April 6th we ordered a brand new turbo from Hyundai. We received it within a week from the dealership.

    Upon receiving the turbo from Hyundai this is what we saw:







    The stock internals are SMALL. We were amazed to see wheels that small. Its been awhile to see something that size. lol The stock internals are rated for a maximum WHP in the ball park of 250-260.

    With the turbo in hand we contacted our good friend Mike over at Blouch Turbo in Pennsylvania to give us a hand in coming up with a new upgraded combination for factory turbocharger. After Mike and the rest of the Blouch team received the turbo they had it for less than a week and it was on the way back to us with a new combination installed that they feel is a good starting point to seeing where the stock turbo housings will allow us to go.

    We received the turbo back to find the factory compressor wheel was upgraded to a Blouch 35lb per min billet compressor wheel and the small stock turbine wheel was swapped for an upgraded TD04HL turbine wheel. This combination is said to be good for about 350whp.

    After the Blouch treatment she now looks a little something like this:








    This turbo has been on my desk since we received it back. We want to see what we can make on the factory turbo before jumping the gun to upgrade the turbo like others are doing. In order to further progress on the project we're at the mercy of getting some software to tune the car with. Thats the hold up right now.

    Doing an upgrade on the factory turbocharger has many advantages over just switching to a turbo kit. If any of you have followed what we've done on the Evo we have pursued running a stock appearing turbo on the cars. There are a few reasons why. Price stays down, they offer a better spool up than a bigger framed turbo, they keep the fun factor of ripping around in the car, you have the stock appearing "sleeper" look and not to mention we have them pumping out some major power. Last year we built a stock appearing turbo Evo that went mid 9's in the quarter.

    We offer 2 different "flavors" now in stock appearing for the Evo. A mild upgrade and also something a bit more wild.

    I know some will ask "Why stick with the factory turbo with upgraded internals instead of just putting a complete kit on with a bigger turbo." The reason being is this.... coming from a 500+whp Evo powered with a larger 30series based turbo as well as driving plenty of Evo's and other cars with bigger turbos on them I can tell you that a stock appearing smaller framed turbo is a LOT more fun to drive around. After driving my car and then hopping into a car with a stock turbo or a 20G it almost made me want to take my turbo off just for more fun. If the Coupe pans out to be just like those other cars I think a bolt on 400whp stock appearing turbo will be the ticket for FUN.

    Ive been quite a few places with the Coupe and one of the many comments I get is "So when is the 35R going on?" My reply "Probably never." A big turbo is fun for big power, drag racing, highway runs, etc... its not that FUN feeling though like a smaller turbo has when you can rip around town, hit some back road twisties, etc...a smaller turbo just makes the car more enjoyable to drive. I may put a big turbo on later just to see what we can do down the quarter. Only time will tell once we get into the testing of these stock appearing combination's.

    Getting the perfect combination will take a little time but if you bare with us I'm sure it will be some interesting info as we start to test these and learn about the Coupe and its performance even more. We welcome you to come along for the ride as we dip further into this venture.


    *PLEASE NOTE* - This turbo as well as any future combinations are still in the developmental stages. We will be offering these directly through Buschur Racing once the testing and final combination(s) have been reached that we will be offering. With this said we ask that you please do not call Blouch to try to order this or get more information of what is coming. They are a very busy group over there.


    Thank you for reading as well as your continued support of Buschur Racing and what we're doing.
    Last edited by Jrod@Buschur; 06-09-2009 at 11:56 AM.
    Jarrod Barnett
    Sales Manager

    www.BUSCHURRACING.com

    Buschur Racing
    24 West Main St.
    Wakeman, OH 44889
    Phone:440.839.1900
    Email: jarrod@buschurracing.com

  2. #2
    Join Date
    Mar 2006
    Location
    Las Vegas
    Posts
    1,787

    Default

    Damn that's pretty freakin cool
    I USE AND ONLY SUPPORT THE BEST. IF BUSCHUR MAKES IT, I HAVE IT
    Buschur Built and Tuned... 9sec full weight street car.
    10.35 at 144.97 on only 32psi and ban from LVMS no highboost pass for me EVER
    http://www.buschurracing.com/
    http://www.awdmotorsports.com/
    http://www.shearerfabrications.com
    http://www.cbrdspeedfactory.com/
    www.myspace.com/vwjeff

  3. #3
    Join Date
    Feb 2005
    Location
    Charleston SC
    Posts
    95

    Default

    Can't wait to see the outcome. Great work guys.

  4. #4
    Join Date
    Jun 2007
    Location
    Grand Rapids, MI
    Posts
    231

    Default

    Very cool. So is there anyone developing software for the Gen? If so do they have an eta?

  5. #5
    Join Date
    Jul 2005
    Location
    Greenfield Twp, Pa
    Posts
    2,629

    Default

    pretty fn sweet!
    Keeping Mitsubishi in business since 2003..

  6. #6
    Join Date
    May 2003
    Location
    Utah
    Posts
    215

    Default

    "A big turbo is fun for big power, drag racing, highway runs, etc... its not that FUN feeling though like a smaller turbo has when you can rip around town, hit some back road twisties, etc...a smaller turbo just makes the car more enjoyable to drive."

    I totally agree with JROD's statement above! The car has gotta be fun and responsive.
    Genesis Coupe + 4b11T + BR = WIN

  7. #7
    Join Date
    Jul 2005
    Location
    Dayton,Ohio
    Posts
    1,436

    Default

    Nice man! Can't wait till you guys get some tuning software so you can wake that car up!
    Squarepants Racing
    Buschur Racing
    '03 lightening yellow evo
    348 whp and 305 trq on BR dyno 12.5@110 mph
    '03 Tarmac Black evo8 (sold) : (
    1.7 60ft 10.86@133 mph on pump/meth
    Buschur ReTuned built 2.3, 40R 571 awhp, 444 awtrq pump/meth. 617 whp, 486 trq C16 map

    '91 red 1G Talon on the way!

  8. #8
    Join Date
    Dec 2004
    Location
    Oberlin Ohio
    Posts
    109

    Default

    you mean you ordered it from ELYRIA HYUNDAI
    Joe from OBERLIN: 1991 TSI AWD. auto trans. Custom grind 270 cams, Stainless valves, 2.5" upper intercool piping,HKS VPC, Buschur 3" down pipe, 1g/ported exhaust mani, 2.5" o2 housing w/external dump, 2" j pipe, Big 16g, 560 injectors, 255 pump, Buschur MBC, All emissions removed, Alt. relocation, manual steering,

  9. #9
    Join Date
    Jul 2003
    Location
    Norwalk,Ohio
    Posts
    2,454

    Default

    Quote Originally Posted by oberlinTSI
    you mean you ordered it from ELYRIA HYUNDAI

    Yes it was ordered from Elyria Hyundai for whatever difference that makes I dont know. I do bet that Elyria Hyundai ordered it from Hyundai directly. So... No I meant what I said. I just wish I knew which factory it was assembled in, what time it was assembled, how long it took to assemble and by whom so I could include that information as well.
    Jarrod Barnett
    Sales Manager

    www.BUSCHURRACING.com

    Buschur Racing
    24 West Main St.
    Wakeman, OH 44889
    Phone:440.839.1900
    Email: jarrod@buschurracing.com

  10. #10
    Join Date
    Mar 2009
    Location
    Sanford, FL
    Posts
    66

    Default

    i had a thought about this for a little while... i was wondering if, since you were able to adapt a BOV on the compressor housing, is it possible you might be able to adapt an external wastegate to the turbine housing and do away with the stock internal gate? granted i understand running an external gate on a turbo that came internally gated would mean having to weld shut the wastegate flap inside the turbine housing (or will that not be necessary?).

    (this is an aftermarket turbine housing, but wonder if something like this could be adapted to the stock housing)
    Last edited by philm00x; 07-16-2009 at 05:56 PM.

  11. #11
    Join Date
    Jul 2003
    Location
    Norwalk,Ohio
    Posts
    2,454

    Default

    There is no NEED to externally gate the stock Coupe turbo.
    Jarrod Barnett
    Sales Manager

    www.BUSCHURRACING.com

    Buschur Racing
    24 West Main St.
    Wakeman, OH 44889
    Phone:440.839.1900
    Email: jarrod@buschurracing.com

  12. #12
    Join Date
    Sep 2009
    Location
    Valcourt, QC, Canada
    Posts
    4

    Default

    Quote Originally Posted by JROD
    There is no NEED to externally gate the stock Coupe turbo.
    so what about the price of that turbo upgrade? can we use it on a bone stock coupe?

  13. #13
    Join Date
    Jul 2003
    Location
    Norwalk,Ohio
    Posts
    2,454

    Default

    Quote Originally Posted by davidpaulin
    so what about the price of that turbo upgrade? can we use it on a bone stock coupe?
    Price has yet to be determined. That will not be finalized until the final testing is done.

    No you will not be able to use this on a bone stock car. You will need the supporting mods such as Exhaust, Intake, BOV, FMIC kit, etc...
    Jarrod Barnett
    Sales Manager

    www.BUSCHURRACING.com

    Buschur Racing
    24 West Main St.
    Wakeman, OH 44889
    Phone:440.839.1900
    Email: jarrod@buschurracing.com

  14. #14
    Join Date
    Aug 2005
    Location
    Palmetto, FL
    Posts
    33

    Default

    Please tell me that's a 14b conversion...

    joebucci.com

  15. #15
    Join Date
    Sep 2009
    Location
    Valcourt, QC, Canada
    Posts
    4

    Default

    will that upgrade make the car hold it's boost better?? i don't know if it's a turbo or boost control related problem but my old car (98 dodge neon with srt turbo) held boost much better than my gen does .. i had 13-14 psi from 2000rpm up to 7000rpms .. the gen just seems to fall on it's face as the revs go up ..
    i dont wanna pump 400 whp out of my engine but i would like something that pulls more like a sports car instead of a freighliner lol ..
    Last edited by davidpaulin; 10-23-2009 at 04:48 PM.

  16. #16
    Join Date
    Sep 2009
    Location
    Valcourt, QC, Canada
    Posts
    4

    Default

    any new infos ?? what's going on with this .. i hope we get news soon!!

  17. #17
    Join Date
    Nov 2009
    Location
    Chicago, IL
    Posts
    86

    Default

    nice setup, and trick bov adapter.

  18. #18
    Join Date
    Nov 2009
    Location
    Central Florida
    Posts
    61

    Default

    Wow, that is one impressive part! I'm sure it's a great upgrade for the Genesis community!

  19. #19
    Join Date
    Aug 2004
    Location
    Ohio
    Posts
    366

    Default

    bump for updates??
    I'd rather drive a slow car fast, rather than a fast car slow.....

    Think about it!

    Gen Coupe, here I come!

  20. #20
    Join Date
    May 2003
    Location
    Wakeman, Ohio
    Posts
    5,443

    Default

    No updates, unfortunately, we are still waiting on a quality tuning product for the car.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •