Buschur Racing Manual Boost Controller Instructions
BUSCHUR RACING
Inline Manual Boost Controller Instructions
Thank you for purchasing the Buschur Racing Inline Manual Boost Controller. We have put together these instruction to ease the installation of your new part. This should take about 20 minutes to install.
Your new boost controller will arrive to you preset from Buschur Racing approximately at the lowest boost setting possible. It will be close to the preset pressure on your wastegate spring.
In order to increase your boost the boost controller would be turned clockwise. Of course if you want to lower the boost it would be counter clockwise.
WARNING: If the adjustment knob is backed out to far the boost controller will come apart. If this does happen be sure the ceramic ball bearing and spring have not fallen out.
If you have any questions or concerns you can reach Buschur Racing Monday-Friday 9a.m.–6p.m. EST at 440-839-1900.
Thank you,
Buschur Racing
*PLEASE NOTE*
Buschur Racing asks that you do NOT disassemble this boost controller. If you do important parts may be lost or something inside may be messed up. NO lubrication is needed inside other than what is already in there when it leaves the shop here. Thank you for reading this.
