Anything Performance Related
I was required to remove this stuff from my website since it is copyrighted. If someone can host these, PM me and ill will get them sent over to you.
Special thanks has to go out to David Buschur for adding a great deal of info to this weight reduction thread. this is what brings a great community together. We all know the evo 8 and 9 weigh a lot. Most of us would like to lighten them up a little bit. So post up your mods you have done to...
I am asked these questions quite often and thought it would be a good idea to list the answers here. Easiest definitions I found were on Wikipedia so I am just cutting and pasting. I get a few UK magazines and they are always speaking of HP in BHP and Torque in NM. So for guys who are as dumb as...
ok guys here is a thread for all the trq specs for the evo 8/9 let me know if im missing anything lower arm assembly Lower arm assembly to crossmember nut 93 ± 15 N⋅m (69 ± 11 ft-lb) Lower arm assembly to knuckle nut 88 ± 10 N⋅m (65 ± 7 ft-lb) Lower arm assembly to shock absorber nut 88 ±...
We were contacted two months ago and asked if we'd send in any fuel pump products we offered for the EVO8/9 and the EVOX, by DSport Magazine. We sent them our double pumper kit for both cars and hadn't heard anything back until we got the magazine in the mail. DSport tested 31 different fuel...
Here's my decision. I'm shipping my car to hawaii where we only have 92 oct. The engine is stroked to 2.3, so I know the down low numbers will be good. Not looking for some high powered beast (yes it would be nice), but something to enjoy my drives to and from work. What are some of the tuning...
So I get this question all of the time, what size injectors do I need? well I've put together some recent results and will share with you what I found. Hopefully this will answer some questions. I will update my first post as I gain more useful data of my own. I have way more data but only...
Im assuming one of my cores in my intercooler has a hole in which is causing a huge boost leak and was wondering if anyone has a good aftermarket intercooler for sale or fuck even a stock one for cheap. Let me know thankx
To start with an example the last time i was on a dyno was 2 years ago at buschur where i laid down 320hp and 310 tq on 93 octane using a ebay fmic,injen ic piping, bc272 and ebay exhaust...Since then ive been swapped to a ported 10.3 hotside,and every other buschur bolt on. As of lately i swapped...
There has been allot of debate on Meth/Water Injection for the Evo. I know the big fuel to use these days is E85 but as we all know is not easy for some of us to get our hands on. I am pretty much maxed out on CA 91 Piss gas on my OEM Turbo, and was considering an Aquamist HFS-3 kit, run a duel...
Well Emery convinced me to change to E85.. so im going to run pump 93 on one map n e85 when I want more boost. Anybody have ups n downs to running E85???
Hey guys, I am in need of a Triple Disc clutch and I was wondering if anyone had experience with both the 023SR and 033HR clutches. I know that the HR holds up to more torque but I do not see myself making above 600wtq ever so would the SR or HR be a better choice. I will be drag racing the car...
Which NGK spark plug should I run and how much to gap them.Thanks
i have read a lot of things and none of them have what im looking for. so this is what i want to is if i should get a tune or wait.i have br 3in turbo back intake and a br o2 housing. so i want to know if i should get tuned now or get something small like uicp. i want cams but thats not going to...
OK have a question for you guys. I have an evo the motor got built about 1000 miles ago, big turbo etc.. Now the motor is 9:1 and just my luck i find out there putting e85 stations near me i am going to switch over So my question is how much power would i be missing not having a higher...
Any one out there running this same oil ? I just put some in my BR 2.0 I have complete faith in this oil just because Ive seen Big AL run it in his evo and it was recommended by Nick at buschur to me just wanted to see if there is anymore positive input about this oil and if people with built...
I was wondering which turbo would be more street and highway friendly?? How's the spool on both on the 2.1L block? The mods will be a BR 2.1L Stage 3 block, head, ported intake mani, ported stock t body, pump gas, and pump/meth....
Back in the late spring we received an inquiry from a gentlemen who is currently deployed and wanted to have his car built while he was gone. He was going to be back in the states right around the time we hold our annual DSM/Evo Shootout which is August 14 & 15. His one stipulation was that he...
Well its been a little over a year since I have had my evo IX up running (only 4 months to build only working on weekends) Let me hit you up with a little background on why it took so long. When I first was stationed in Yuma Arizona at MCAS Yuma on Feb 2009. I was hit with a wave of bullshit. My...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules
