PDA

View Full Version : Always green



lukeman
06-06-2008, 10:59 AM
Does anybody could say what are the FP Green turbo trim numbers? (compressor and turbine).

brian 5150
06-06-2008, 11:24 AM
last i checked it was just a 50 trim with a tdo6h housing and a 3 inch inlet.

lukeman
06-06-2008, 09:16 PM
Thanks Brian. I asked because in a Sport Compact Car, September 2005, Volume
17 No.09. On page 68 it says is 56 trim.

brian 5150
06-06-2008, 09:23 PM
i know it flows 730cfm and its quite a bad ass turbo. you can also get it with a 7cm housing and a 8cm housing but it maybe a 56 trim im not sure how they rate them.

AWDcrash93
06-07-2008, 09:46 PM
well, heres my green with the compressor housing off, not that you can tell what it really is...
its a big ass garret compressor wheel,TD06H exhaust wheel, 7cm housing. thats all i know. Forced performance wont tell what it is.
http://i56.photobucket.com/albums/g196/racerx450r/0426081109.jpg

lukeman
06-07-2008, 10:40 PM
With the compressor housing off, and I you can give me the inducer and exducer diameters, I will be able to find out the trim setting.
Trim = (minor wheel diameter/major wheel diameter)Č x 100.
Just take the measurements and weŽll have the trim number.

Lonnie gandee
06-07-2008, 10:42 PM
With the compressor housing off, and I you can give me the inducer and exducer diameters, I will be able to find out the trim setting.
Trim = (minor wheel diameter/major wheel diameter)Č x 100.
Just take the measurements and weŽll have the trim number.


I think that pic was before the turbo went on the car.

Why must you know the trim?

Its the biggest 50-trim made.

AWDcrash93
06-08-2008, 05:54 PM
yea its already on the car.
next time i have it off. which hopefully will be soon to change the head.